Lichtgitter offshore gratings have been specially developed for offshore use.
Additional round wires welded underneath in the bearing bar direction reduce the given bearing bar pitch so that, for example, a test ball with a diameter of 15 mm is prevented from falling through.
A 20 mm or 15 mm ball proof can be achieved thanks to the round wire welded underneath
High resistance
High bearing capacity, as bearing bars are not weakened by welding in cross bars
Good torsional rigidity even with subsequently installed cut-outs
Lichtgitter offshore gratings achieve a ball proof of 20 mm thanks to the additionally welded-in round wire – or even 15 mm for particularly safety-relevant areas. Offshore gratings belong to the so-called special gratings and are available from a quantity of 300m².
Material
Surfaces
Slip resistance
Type: SPOX13 530-41/101-5
SP |
forge-welded grating |
O |
Offshore |
X13 |
Slip resistance no. 13 |
530 |
Bearing bars 30 x 5 mm |
41/101 |
Pitch: 41.46 x 101.6 mm |
5 |
Banding: 30 x 5 mm |
Offshore gratings are available in various bearing bar heights, thicknesses and pitches to meet different requirements. Below you will find a selection of the most common variants. These can be combined to a certain extent. We would be happy to check the optimum solution for you – simply contact our sales team.
Gratings Tailor-Made. We supply you with pressed and forge-welded gratings in the common standard types in 6-8 working days and in max. 10 working days including technical processing.
We have an extensive stock program. This means you can receive gratings, grating steps, perforated metal planks and GRP-Products in common standard designs and dimensions within 48 hours.
